DisplayPort is the newest digital display interface standard introduced by VESA.The format supports both digital video and audio. Here's a simple solution for connecting your DisplayPort equipment devices using DVI-D cables to your exisiting DVI devices.This simple adapter is all you need to convert from one format to the other. Max. Supported Resolution - 1920x1200 (250MHz) Supports 1080p (1920x1080) resolution. Note: This is a passive adapter.While DisplayPort connectors are capable of passing a DVI signal, DisplayPort and DVI signals are basically different and not compatible with each other. This adapter does not actively convert a DisplayPort signal into a DVI signal. In order for this adapter to function properly, you must have a DisplayPort source device capable of producing and passing out a DVI signal through the DisplayPort jack.
Feature: DisplayPort v1.1 Compliant. Enable high quality optional digital audio transmissions. Embedded clock architecture to reduce EMI susceptibility. Support greater then QXGA (2048 x 1536) resolution at 24-bit color depths. Support existing VESA and Consumer Electronics Association(CEA) standards. Support hot plug and un-plug detection as well as link status-failure detection. Support reduced bandwidth transmission via direct drive over a 15 meter cable. Supports a minimum of 1080P resolution at 24bpp 50/60 Hz at 15 meters. Support Displayport connector 20 pin. Support 8-bit & 10-bit Deep Color. Support the video Banwidth up to 10.8Gpbs. Support the 1Mbps'bidirectional auxiliary channel. Support the one lane one direction four-line connection.
|